Progettazione & Vendita Droni - Tel.0586.408924

DJI Lightbridge 2.4G Full HD Video Downlink Digitale

799.00 IVA inclusa

Caratteristiche tecniche
Video Input: HDMI, AV, DVSB(per gimbal DJI)
Formati supportati(HDMI): 720p50, 720p60, 1080i50, 1080i60, 1080p25, 1080p30, 1080P50, 1080P60
Formati supportati (AV): PAL25, NTSC30
Frequenze radio: 2.405-2.4835GHz, certificati FCC/CE
Interfaccia (Unità a terra): LED indicatore, Interruttore accensione, Interfaccia ricarica USB 2.0, HDMI, Remote control input (supporta due controllers)
Interfaccia (Unità in aria): LED indicatore, DBUS, HDMI, AV, Gimbal Port Frequency, interruttore switch
Contenitore esterno: Lega di alluminio
Alimentazione (Unità a terra): DC corrente in input: 11-26V batteria al litio integrata, Consumo: 6W (senza periferiche USB), Consumo: 8W (con periferiche USB)
Alimentazione (Unità in aria): DC corrente in inpu: 11-26V, Consumo: 8W (normale utilizzo)
Dimensioni:
Unità a terra: 125mm x 89mm x 20mm,
Unità in aria: 67mm x 47mm x 20mm
Peso
Unità a terra: 360g, Unità in aria: 70g

DJI Light Bridge Vendita
Dati Tecnici – Technical Data

2.4G Full HD Video Downlink Digitale
DJI Lightbridge è un nuovo rivoluzionario 2.4G video Full HD downlink digitale. DJI Lightbridge offre un equipaggiamento estremamente potente racchiuso in una scheda piccola e leggera. Offrendo una trasmissione di dati video di 1920 x 1080p @ 30fps da un massimo di 1,7 chilometri (1,05 miglia) di distanza, fornisce la soluzione ideale al fotografo professionale e agli utenti FPV. Preparatevi a liberarvi e a rimuovere i limiti dalla bassa definizione dei trasmettitori video analogici.
DJI Lightbridge, 2.4G Full HD Digital Video Downlink
DJI Lightbridge is an all new revolutionary2.4G Full HD digital video downlink. DJI Lightbridge offers extremely powerful equipment packed into a small and light-weight form factor. By offering 1920 x 1080p@30fps video data transmission from up to 1.7km (1.05miles) away, it’s the ideal solution for the professional aerial photographer and FPV users. Set yourself free and remove the limits from low definition analog video transmitters.
Features:
2.4G Full HD Digital Video Downlink -1920×1080@60fps input and 1920×1080@30fps output Extreme Long Distance Transmission -Less than100mWground unit transmission in full compliance with CE and FCC certification -5dBi omni-directional antenna offers an enormous distance of up to1.7 km (1.05 miles) -Optional 14dBipatchantenna boosts transmission distance tremendously to 5km (3.1 miles)
Multiple Input And Output Connections
-AV input
-HDMI input
-DJI Zenmuse gimbal input (Digital Video/Power Supply/OSD Data)
-HDMI HD image output
-USB 2.0 image data output for iOS and Android phones and tablet synchronization
Built-in Remote Control Link
-Uplink remote control transmission and downlink video work simultaneously on2.4GHz.
-Remote control data travels to the uplink via the TX-Thru Port at the same time that video is
streamed back down all without interference.
-Support for two remote controls: one for flight control (10 Channels) and the other for gimbal
control(6 Channels). Control signals are received in the air and then transmitted to the flight
controller through D-BUS.
-When used with a non-2.4G radio transmitter, video only transmission operation is supported.
The DJI 5.8G radio transmitter is recommended.
Strong Anti-Jamming Technology
-Frequency Hopping Spread Spectrum (FHSS) + Direct Sequence Spread System (DSSS)
technology is used for uplink transmission to enhance stability and offer anti-jamming capability.
-MIMO multi-antenna technology and OFDM modulation methods along with advanced
algorithms are utilized for downlink transmission to enhance data bandwidth, improving
dynamic performance and increasing stability even in harsh environments.
-Channel interference is constantly monitored during downlink transmission with automatic
switching between 8 channels for the best possible signal.
-Up to 8 downlinks can be connected for parallel streaming and work independently without
interference.
Low Latency Transmission Maximum latency of up to 80ms Built-in OSD(On-Screen Display)Function -No additional equipment required for OSD functions when used with A2/WooKong-M/Naza-M V2 flight controllers. Flight parameters will be displayed onscreen. -OSD functionality can be turned off via mobile software for HDMI and iOS/Android Output. Must Work With DJI Multi-Rotor Flight Controllers -DJI A2, WooKong-M and Naza-M V2 flight controllers -Phantom 2, with DJI 5.8G radio transmitter. Multi-device Operation Mode, Stable And Reliable -A single air unit can transmit to multiple ground units sending video to multiple screens. (Only one of the ground units can send a control signal while additional ground units will only be able to receive a video signal) -Encryption ensures only authorized devices can receive data which can be programmed via mobile device software. Built-in High Capacity Battery -Ground unit has a built in high capacity 4000mA battery offering up to 4.5hours of use per charge. -Rechargeable through the supplied charger or via a3S~6S Li-Po power battery. A full charge takes approximately1.5 hours. -LED battery level indicator -Also functions as a USB charger for mobile devices prolonging the life of peripheral equipment.
Electromagnetic Interference Shielded Structural Design -Aluminum alloy casing -Extreme internal and external shielding for interference protection.
Built-in Remote Control Link
-Uplink remote control transmission and downlink video work simultaneously on2.4GHz.
-Remote control data travels to the uplink via the TX-Thru Port at the same time that video is
streamed back down all without interference.
-Support for two remote controls: one for flight control (10 Channels) and the other for gimbal
control(6 Channels). Control signals are received in the air and then transmitted to the flight
controller through D-BUS.
-When used with a non-2.4G radio transmitter, video only transmission operation is supported.
The DJI 5.8G radio transmitter is recommended.
Strong Anti-Jamming Technology
-Frequency Hopping Spread Spectrum (FHSS) + Direct Sequence Spread System (DSSS)
technology is used for uplink transmission to enhance stability and offer anti-jamming capability.
-MIMO multi-antenna technology and OFDM modulation methods along with advanced
algorithms are utilized for downlink transmission to enhance data bandwidth, improving
dynamic performance and increasing stability even in harsh environments.
-Channel interference is constantly monitored during downlink transmission with automatic
switching between 8 channels for the best possible signal.
-Up to 8 downlinks can be connected for parallel streaming and work independently without
interference.
Important Notice :

The HDMI cable will strangle onto the high end gimbal like NEX 7, GH3, 5D MARK 2/3 or others for high end fly platform. It probably will cause damage to either the HDMI cable or the high end gimbal (really low possibility for damage of gimbals), if it is carrying out y-axis adjustment or movement.

The HDMI cable shipped with Lightbridge is supposed to be for installing on Phantom 2 as default, not officially for the high end Gimbals.

We highly recommend the Lightbridge to be installed onto Phantom 2. Risk Management must be taken care of if customers insist to install Lightbridge with our high end Gimbals.
Nota importante :
Il cavo HDMI fornito con Lightbridge dove essere usato per l’installazione solo su Phantom 2 come impostazione predefinita, non usare per le Gimbals di fascia alta come la NEX 7, GH3, 5D MARK 2/3 o altri , potrebbero causare gravi danni al cavo HDMI o alla sospensione cardanica della Zenmuse.
Se usato su Gimbal DJI di fascia alta qualsiasi danno non è riconosciuto in garanzia .

 

Caratteristiche tecniche
Video Input: HDMI, AV, DVSB(per gimbal DJI)
Formati supportati(HDMI): 720p50, 720p60, 1080i50, 1080i60, 1080p25, 1080p30, 1080P50, 1080P60
Formati supportati (AV): PAL25, NTSC30
Frequenze radio: 2.405-2.4835GHz, certificati FCC/CE
Interfaccia (Unità a terra): LED indicatore, Interruttore accensione, Interfaccia ricarica USB 2.0, HDMI, Remote control input (supporta due controllers)
Interfaccia (Unità in aria): LED indicatore, DBUS, HDMI, AV, Gimbal Port Frequency, interruttore switch
Contenitore esterno: Lega di alluminio
Alimentazione (Unità a terra): DC corrente in input: 11-26V batteria al litio integrata, Consumo: 6W (senza periferiche USB), Consumo: 8W (con periferiche USB)
Alimentazione (Unità in aria): DC corrente in inpu: 11-26V, Consumo: 8W (normale utilizzo)
Dimensioni:
Unità a terra: 125mm x 89mm x 20mm,
Unità in aria: 67mm x 47mm x 20mm
Peso
Unità a terra: 360g, Unità in aria: 70g

 

DJI Lightbridge 2.4G Full HD Video Downlink Digitale del: 2015-03-26T11:13:17+00:00 da Drone Point - Staff

Richiesta Prodotto


Domande?

Progettiamo Droni Professionali conformi Enac ed offriamo Assistenza Tecnica Specializzata su qualsiasi prodotto.

Contattaci per maggiori informazioni o prenotare un appuntamento.

Droni Professionali

Guarda la pagina delle nostre realizzazioni effettuate negli ultimi anni.

Galleria Fotografica Droni