Scheda in Italiano in fase di aggiornamento.
ugCS PRO è un software professionale per che permette di interfacciare molteplici elettroniche di volo come DJI, 3D Robotic, Mikrokopter ed altro, per effettuare operazioni a pilotaggio remoto in applicazioni quali fotogrammetria, agricoltura di precisione, videosorveglianza, ispezioni etc con avanzati strumenti software.
Per scopi professionali, è distribuito in due differenti versioni “ugCS ONE” e “ugCS PRO” che limita o amplia determinate funzionalità ricercate dal professionista.
Di seguito viene riportata la descrizione in Inglese che verrà tradotta dal nostro staff quanto prima.
Mission planner | Drone control
Mission planning and drone control with UgCS software is a perfect opportunity to plan, control and manage your flights using features like: Aerial survey planning tools, Fly longer routes with changing the battery, Immersive 3D mission planning environment, Elevation profile, Telemetry display, Automatic flight mode (waypoints), Direct drone control, Click & Go, Joystick control and Software emulator
Aerial survey planning tools
UgCS comes with multiple in-built tools to make aerial surveys and mapping as easy and effortless as possible. Choose one of the pre-installed camera pre-sets or create a new one to suit your camera. The area scan mission will be calculated automatically based on the settings of your camera. Alternatively you area able to manually enter all the area scan parameters such as overlap and desired altitude.
Fly longer routes with changing the battery
At UgCS we know that battery is a limiting factor for automated flights. This is why most of our drones are able to fly longer routes with the possibility to stop the mission, exchange the battery of the drone and then continue the flight from where you left off.
Immersive 3D mission planning environment
UgCS features mission planner with a Google Earth-like 3D interface for mission planning for drones. This allows you to navigate the environment around you more easily. Moreover, a 3D mission planning environment gives you more control by allowing you to view the created flight plan from all angles, taking into account any obstacles such as terrain or buildings.
With UgCS you will get a 3D globe with pre-installed terrain elevation data. By knowing the exact altitudes above sea level at all points you will be able to plan your missions with respect to the surroundings. After the calculation of each flight plan you are able to see an elevation profile and the altitude above ground and sea level where the drone will be at each point.
Pilots would not be able to fly airplanes or helicopters without the dashboard. Drones should be no exception. UgCS gives you an in-flight display of all the telemetry data you are interested in in the telemetry data window. This includes the battery level, radio link and GPS signal quality, current course and heading, speed, altitude and much more.
Automatic flight mode (waypoints) and direct drone control
In UgCS there are multiple different flight modes. Manual flight mode allows you to control the drone as you are used to – with the RC remote. Once you have created a flight plan and uploaded it to the drone you will be able to use the Automatic flight mode, allowing you to send the drone on the mission. For many drones UgCS also supports Click & Go and Joystick control flight modes. Read more about these further down.
Click & Go
In UgCS the Click & Go flight mode is supported for most drones. In cases when RC control is not optimal, but you need the drone to go someplace fast, this is the best solution. Simply click on the map where you want the drone to go, enter a desired altitude and it will fly to the desired location.
Feel like flying your drone from your laptop instead of the RC remote? We’ve got you covered. UgCS supports the Joystick flight mode. This allows you to plug in a joystick into your laptop and then control the drone through the telemetry link. Not only is this more exciting than the RC remote, it also gives you more intuitive control over the drone
There are in-built software emulators in UgCS for fixed wing and rotary wing drones – emuplane and emucopter. If you don’t have a drone with you or just want to test out a route before uploading it to a real drone the emulators can help. Feel free to play around with them to discover the exciting new features of UgCS in a safe environment
Post-flight analysis and Image processing
UgCS offers an in-built geotagging tool for easy image geotagging and possibility to replay your flights with the telemetry player.
UgCS comes with an in-build geotagging tool. This tool allows you to sync the timestamps of the images with the telemetry data recorded during the flight. After placing the geotags with coordingates and correct altitudes on the images you can process them in software such as Pix4D or similar to create map overlays or 3D models.
All the telemetry data from your flights is recorded in UgCS. With UgCS you are able to replay your flights. The telemetry player is not only able to replay the telemetry data from your drone, it also allows you to replay the video recorded by the drone during the flight.
UgCS ground station software allows users to import map imagery, import DEM data to add custom elevation models, import KML data to add placemarks and import 3D buildings.
UgCS allows you to import the models of 3D buildings. This allows UgCS to automatically calculate the flights around the buildings by taking into the account the desired pre-set distance to objects. The amount of buildings which can be imported is 20 in the Open version, 100 in One version and an unlimited amount of buildings in the Pro version.
KML data import
KML data import allows operator to import placemarks to denote important places on the map.
KML stands for Keyhole Markup Language.
DEM data import
DEM stands for Digital Elevation Models. The terrain is always changing. These changes are not always implemented into 3D maps as fast as it is needed. An example would be a quarry. If the operator of a UAV would want to fly an automated mission for the purposes of mapping, surveying or monitoring a quarry, he would need to import DEM data to fly below what would otherwise be considered ground level. This data would then make the drone able to fly closer to the ground in the quarry to do its mission. Another scenario is in mountains where operator needs to use DEM with more precise data as commonly available map providers use too few elevation points on their maps to plan safe missions. This feature is available for users of UgCS Pro.
UgCS comes with in-built No-Fly zones around all major airports. In UgCS you are able to create your own No-Fly zones. UgCS allows you to set the limits – how far and how high you want to allow the drone to fly.
No-Fly zones – airport registry
UgCS comes with in-build no-fly zones for all major airports. Since all airports have a restricted flight zone when drones are not allowed for obvious reasons, this makes it safe to plan flights when not sure about the surroundings since the flight path will automatically be calculated around the no-fly zone. Airport no-fly zones can be disabled in UgCS Pro.
No-Fly zones – custom zones
In UgCS One and UgCS Pro you are able to create your own custom no-fly zones. This allows you to specify regions where flights are prohibited, thus enabling you to automatically calculate missions around these areas and making sure that the drone does not enter them while on an automated flight.
Fly zone limits for routes
In UgCS you are able to set boundaries for the flights starting from the first waypoint. This allows you to make sure that the drone does not fly too far away or higher than desired and allowed by local laws. In UgCS Open the default restriction for flights is 500m from the first waypoint and 120m AGL. In UgCS One and Pro these restrictions can be removed and set any desired values
ADS-B feature in UgCS monitors close-by aircraft and sends the operator warning signals in case an aircraft is approaching the drone. ADS-B helps you to be safe and more aware of what is going on around you in the air.
UgCS is compatible with ADS-B receivers such as microadsb.com. This means that you can bring an ADS-B receiver into the field, connect it to your laptop and once it’s recognized UgCS will warn you of any aircraft approaching your drone. This feature is available for users of UgCS One and UgCS Pro.
Here at UgCS we have experience with setting up ADS-B transponders to work with small drones. Parameters such as Flight ID and Squawk code can be set via UgCS. This feature is available only to the users of UgCS Pro. To get more information regarding the desired setup and specifics feel free to contact us.
Video recording and camera footprint
The video recording option enables an operator of a UAV not only see live video feed from the drone it gives also means to record it and save it on a computer.
The camera footprint option allows you to monitor which area on the ground is the camera of the drone facing.
In UgCS you are able to not only display the video feed coming from your drone, but also record it. This recording can then be replayed later on in the telemetry player. It is available for the users of UgCS One and Pro.
The camera footprint option can be enabled for drones in UgCS, allowing you to see the area seen by the camera lens in real time. This feature is useful for industrial monitoring, agriculture and has many other applications. It is available for the users of UgCS One and Pro.
Multi-operator / Multi-drone support
Multi-operator support allows users of our Pro version to connect many Clients to a single Server. This feature is available to the users of our Pro version and allows them to easily control and monitor multiple drones at the same time.
UgCS software has a modular design, meaning that different parts of the software can run on different machines. UgCS consists of the server, the client and VSMs (vehicle specific modules). This structure allows you to have a central ground station monitoring the work of multiple operators in the field.
Because of the modular design of UgCS, it is possible to not only use multiple drones connected to the same computer, but also multiple computers connected to a main ground station. This allows you to have multiple operators of drones, each being monitored by the central ground station giving the directions.
With UgCS you are able to use multiple drones at the same time. More over, these drones do not have to be from the same manufacturer since UgCS supports many different autopilots.