Progettazione & Vendita Droni - Tel.0586.408924

DJI Phantom 4 PRO

1,699.00 IVA inclusa

DJI Phantom 4 PRO – L’evoluzione del Drone DJI serie Phantom 4.

dji_phantom4_pro_1

An uprated camera is equipped with a 1-inch 20-megapixel sensor capable of shooting 4K/60fps video and Burst Mode stills at 14 fps.
The adoption of titanium alloy and magnesium alloy construction increases the rigidity of the airframe and reduces weight, making the
Phantom 4 Pro similar in weight to the Phantom 4. The FlightAutonomy system adds dual rear vision sensors and infrared sensing systems for a total of 5-direction of obstacle sensing and 4-direction of obstacle avoidance.

The onboard camera has been redesigned to use a 1-inch 20-megapixel CMOS sensor. A custom engineered lens made up of eight elements is
arranged in seven groups, it is the first DJI camera to use a mechanical shutter, eliminating rolling shutter distortion which can occur when taking
images of fast moving subjects or when flying at high speed. In effect, it is as powerful as many traditional ground cameras. More powerful
video processing supports H.264 4K videos at 60fps or H.265 4K at 30fps, both with a 100Mbps bitrate. Advanced sensors and processors
ensure everything is captured with more image detail and the image data needed for advanced post-production.

The Phantom 4 Pro controller integrates an upgraded Lightbridge HD video transmission system that adds 5.8 GHz transmission support. The ability to choose between 2.4GHz and 5.8GHz allows pilots to cut through interference and eliminates image lag caused when flying in an area with extensive 2.4GHz frequency use. Normally, Wi-Fi video transmission systems use a 2.4GHz frequency to work with a controller using a 5.8GHz frequency as this prevents interference that can occur when both use the same frequency. If using the same frequency the video transmission system and the remote controller will interfere with each other, causing image lag. The use of two different frequencies has drawbacks in terms of flight performance. For example, flight performance will be affected when either of the two frequencies suffer interference.

The Lightbridge HD video transmission system used in the Phantom 4 Pro uses TDM (Time Division Multiplexing) to transmit signals, allowing it to send controller signals and receive video transmission signals at the same frequency. As the 2.4GHz frequency band is often affected by Wi-Fi, 4G cell towers, and other types of interference in urban areas, a 5.8GHz band will increase transmission reliability. When switched on, the Phantom 4 Pro evaluates local signal levels, automatically choosing the transmission frequency with the lowest level of interference. This ensures the optimum range of a maximum video transmission of 3,5km.
Contenuto del kit:
– Modello quadrirotore assemblato al 100%
– 8 Eliche a sgancio rapido
– Radiocomando 2.4-5.8GHz
– Videocamera 20Mpx (4K) con Gimbal a 3 assi
– Sistema di trasmissione video HD Lightbridge 2.4-5.8 GHz
– Batteria 5870 mAh 4S HV 15,2V
– Micro SD 16GB
– Caricabatterie 100W
– Valigia in espanso per il trasporto
Caratteristiche tecniche:
Dimensioni Interasse motori 350 mm
Peso 1388 g
Radiocomando 6CH 2.4-5.8 GHz mode2 (trasf. in mode1) (incluso)
Motore 4pz (incluso)
Variatore 4pz (incluso)
Eliche 8pz (incluso)
Batteria 5870 mAh 4S HV 15,2V (incluso)
Peso trasportabile –
Videocamera 20Mpx + Gimbal 3 assi (incluso)
Istruzioni INGLESE online

DJI Phantom 4 PRO del: 2016-11-25T11:08:04+00:00 da Drone Point - Staff

Richiesta Prodotto


Domande?

Progettiamo Droni Professionali conformi Enac ed offriamo Assistenza Tecnica Specializzata su qualsiasi prodotto.

Contattaci per maggiori informazioni o prenotare un appuntamento.

Droni Professionali

Guarda la pagina delle nostre realizzazioni effettuate negli ultimi anni.

Galleria Fotografica Droni